Rifle Safe Installation and Password Settings

Rifle-Safe-Installation- Password-Settings

Rifle Safe Installation and Password Settings: Your Guide to Secure Firearm Storage

Are you looking for a reliable and secure way to store your rifles and firearms? Look no further than the BlackSmith New Arrival SF0106 Rifle Safe. Equipped with cutting-edge biometric technology and advanced security features, this safe offers unparalleled protection for your valuables. In this guide, we'll walk you through the installation process and provide step-by-step instructions for setting up your password and fingerprints.

1. Getting Started:

Remove the emergency lock cover to expose the keyhole.
Insert the emergency key into the keyhole and turn it 35° counterclockwise.
Turn the handle clockwise to open the safe.

2. Install Batteries:

Open the battery box cover plate.
Insert 4 AA batteries (not lithium or rechargeable) and close the battery cover securely.

3. Password Setting:

The original password is 1234#.
Enter the initial key "1234#" and press "*" within 6 seconds.
Enter a new 3-8 digit password within 10 seconds and press "#" to confirm.
If the operation is wrong, the buzzer will sound three times, indicating an error.

4. Fingerprint Setting:

Press the setting button until the fingerprint unlock key lights up white and you hear a beep.
Enter the same new fingerprint three times.
If registration is successful, the fingerprint light will turn green.

5. Open the Safe:

Enter the correct user password or press the correct fingerprint to open the safe.
If the wrong password or fingerprint is entered three times, the alarm will activate for one minute.

6. Alarm Function:

Incorrect password entry three times or incorrect fingerprint entry five times will activate the alarm.
Press "*" to activate the alert state, and enter the correct password or fingerprint to stop it.

7. Mute Function:

Hold down the "1" button for 3 seconds to activate the mute function.
Power off and then on the device again to restore normal sound.

8. Restore Factory Settings:

Long press the setting button for 3 seconds to restore factory settings (fingerprint cleared, password reset to 1234).

9. Mounting Instructions:

The safe can be mounted to a wall or floor using appropriate hardware.
Drill holes in the surface and secure the safe using screws and anchors.

10. Troubleshooting:

If the safe does not open with your fingerprint, ensure it is registered correctly and wait for any self-locking to reset.
Use the emergency key to open the safe, replace batteries if necessary, or restore factory settings and re-register fingerprints.
With these installation and password setting instructions, you can ensure that your BlackSmith SF0106 Rifle Safe is set up securely and ready to protect your firearms and valuables. Upgrade to the ultimate in firearm storage solutions today!

Buy Now: Blacksmith Rifle Safes